Nasiol XR03 Professional Ceramic Coating 50mL

Nasiol XR03 has been formulated to shield vehicle paint from scratches and defend against acid rain, bird droppings, road salt, and damaging UV rays. It enriches the depth and gloss of vehicle surfaces and reduces the time spent on appearance maintenance.

WHY XR03?

• No special equipment required, everything is included in box.
• Up to 18 months of advanced durability.
• Deep gloss with superb hydrophobicity.
• High scale resistance against destructive chemicals.
• Recommended for professional detailers.
• Professional detailers: full protection with a single layer.  No toppers needed.  Kit format saves money on shop supply expenses.

APPLICATION SURFACES

NASIOL XR03 is applicable to paint work of cars and transport vehicles, headlights, taillights, rims, black plastic and trim surfaces. Do not apply this product to unpainted plastic parts, fresh paint jobs (up to 3 months), low-quality paint jobs, glass, textiles, tires, and absorbent parts.

APPLICATION

• Ensure that temperature and relative humidity (RH) values (+5˚C ~ + 30˚C / 41 ˚F ~ 86 ˚F / 50% RH) of application space are as close as possible to suggested conditions to achieve maximum product performance. Avoid direct sunlight during the application and only work on cool surfaces. Wash your vehicle thoroughly.
• If required, apply clay bar. After decontamination, apply polishing / compounding via using appropriate tools and silicone / waxfree cutting compounds with respect to the physical condition of your vehicle’s surface. When polishing is complete, wash the car and ensure that all the application areas are totally dry before using the product.
• Prepare the surface by using Nasiol Clean to remove any residual contamination and dry with a lint-free microfiber cloth prior to the use of the product.
• Before using the product, wear the protective nitrile gloves included in the box. Place the suede cloth onto applicator block’s sponge surface proportionally. Shake product gently before use. Do not work on areas larger than 1m²/3ft² at once.
• Open the lid and pour essential amount of product onto the suede cloth. 5-8mL is enough for 1m²/3ft² area. Do not forget to close the lid during the application. Dispose or replace suede after use on 3-4 panel sections.
• Spread the product gently over the surface with a criss-cross motion. Once beading occurs (it takes 30 seconds in normal conditions) wipe off the excess coating and level the product using the Nasiol Microfiber Cloth in linear motions.
• After leveling the coating, perform a final buff by gently using the Nasiol Microfiber Cloth in circular motions for each section.
• Keep the coated surface away from direct sunlight, dust, water and contamination for a 24-hour curing period.

BOX CONTENT

• Nasiol XR03 Bottle
• Nasiol Applicator Block
• Nasiol Suede Cloths x5
• Nasiol Microfiber Cloth (Dark Grey)
• Nitrile Gloves
• Nasiol Window Sticker
• Dropper
• Quick User Manual

‍